The basic product issues must be understood automatic locking screw machine, screw machine

Solve the problem of automatic locking screw machine products

      In July, when I came several important customers, but our engineers do not just come in that day, because the company has recently been busy with staff are cloned, I received under them. Due to recent company busy, engineers, sales staff are scheduled to go to the client company, some customers try to send the prototype, some customers use to investigate the case, some to the customer site to resolve problems. I have received a customer, so the company assemblers will start the machine, so that customers understand is how the automatic locking screw machine operation, and I simply advantages to customers about its function, and also answer customer questions as far as possible, the problem is as follows , what was I talking about the issue in detail with the client, I want to write it down and publish this article on seeing friends can better understand our products, but also for us to further lock screw machine industry has a certain understanding.

1. Automatic locking screw function to store many kinds of data?

Answer: 100 kinds, because we do is universal models, under certain conditions, the machine can be shared, different products just set up procedures done before re-use products, the program can tune out!

2. Lock pay rate reached number one?

Answer: 1.3 seconds to 1.5 seconds, the same kinds of models, the efficiency of the industry-leading lock pay.

3. Electric Pipi mouth is customized it?

A: We are customized according to the customer screws.

4. If I have a product has eight screws, lock the four, fifth teeth slip teeth, the machine is to continue to play or need to take out the screws?

A: If it is slippery tooth it will continue to kick eight screws, but after that kick, will show NG, automatic screw machine screw itself on with detection, so it has been prompt.

5. card feed rate can reach much?

A: The card material rates are per customer relations, and today our customers and I say we have a peer in the client that the test machine card feed rate of 1%, hit 100 screws must card again, this is certainly not our company card feed rate of one thousand two-thirds or so, that there are two locking screws 1000 times get stuck, of course, card stock and screws also have a great relationship, I advise clients to use the automatic locking screw machine screws require suppliers to ensure the best quality screws.

6.PLC with what brand?

A: If the customer does not specify the requirements of what brand, in general we will use Panasonic, Mitsubishi or other import brands.

7. The need to re-customize the phone's product jig it?

A: No, the phone I was the Secretary General of the jig jig, different phone sizes can be shared

8. Replace the product debug time about how long?

A: 15-30 minutes, or tune out the procedures set by the touch screen debugging.

9. The suction will not blow stability?

A: No, the opposite is more stable suction, suction feeder with screw feeding, dolphin screw lock to take over the position after aligning pay, in more stable performance

10. brass screws can be a single head dual automatic locking screw machine this machine twist it?

A: Yes, in fact, like copper and iron screws, the screws can be used for small touch on the suction or vacuum material way.

These are today's customers to consult me 10 questions, and I believe that many customers will have this fundamental 10:00 doubt, so I put it listed here for your reference, if any additional questions, please call 008617348556832, my company as far as possible to give you a satisfactory answer! Basically the customer is satisfied. I hope the above basic questions can help our friends old and new customers.